Industrial Timers

Showing 25–36 of 37 results

  • Eagle Signal DA100 Repeat Cycle Timer

     

    **The DA100 Series is obsolete with no direct replacement.  An alternative product that will work functionally is Eagle Signal’s B506 Programmable Timer along with a mating socket.  Please contact us for more information.**


    The DA100 is a solid state ON/OFF repeat cycle timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. Sixteen time ranges are available in any combination of ON and OFF periods. Two knobs reference to a calibrated scale provide the individual time settings.
  • Eagle Signal DG100 Miniflex Solid State Timer

    **The DG100 Series is obsolete with no direct replacement. Please contact us for assistance in finding a similar timer.*

    The DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. The DG100 series timer is available in 16 time ranges from 3.5 seconds to 30 hours. Time is set with a knob referenced to a graduated scale. A pilot light on the front of the unit indicates when the unit is timing.
  • Eagle Signal HG1 Flexopulse Repeat Cycle Timer

    **The HG1 Series is obsolete with no direct replacement. Please contact us for assistance in finding a similar timer.*

    The HG1 is an ON-OFF repeat cycle timer engineered with the same features as the rest of the plug-in CYCL-FLEX® family.  This timer is equipped with a repeat cycle, two circuit timer housed in CYCL-FLEX® plug-in case, separate dial scale for ON time and OFF time, and individually adjustable ON and OFF time intervals via concentric knobs on front of unit.

  • Eagle Signal HK Time Totalizer

    The Eagle Signal brand HK series time totalizer has a synchronous motor which drives a set of digit readout wheels to indicate the total time the unit is energized. The HK5 series totalizes the “ON” or running time of electrically operated equipment.

    Get a Quote Data Sheet

  • Eagle Signal HP5 CYCL-FLEX Reset Timer

    The HP5 CYCL-FLEX® series timer is a high quality, synchronous motor driven reset timer housed in the standard CYCL-FLEX® plug-in housing. It features 16 standard time ranges from 5 seconds to 60 hours, knob adjustable time ranges – progress pointer for each, highly visible calibrated dials (7.85 inch circumference), easily read and well-spaced calibrations, red progress pointer displays remaining time interval and a pilot light that indicates when timer motor is energized.  Each standard timer is supplied with “power on” clutch operation, and optional reverse action clutch will not reset on power failure.

    $501.84
  • Eagle Signal HP51A6 CYCL-FLEX Reset Timer

    Looking for a different HP5 part?

    CLICK HERE for all other HP5 configurations.

     

    The HP5 CYCL-FLEX® series timer is a high quality, synchronous motor driven reset timer housed in the standard CYCL-FLEX® plug-in housing. It features 16 standard time ranges from 5 seconds to 60 hours, knob adjustable time ranges – progress pointer for each, highly visible calibrated dials (7.85 inch circumference), easily read and well-spaced calibrations, red progress pointer displays remaining time interval and a pilot light that indicates when timer motor is energized.  Each standard timer is supplied with “power on” clutch operation, and optional reverse action clutch will not reset on power failure.

    $501.84
  • Eagle Signal Model 191 Reset Timer

    The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period. The push-button is located in the center of the time set pointer knob on the panel mounted dial. When depressed momentarily, a mechanical latch and switch is engaged, starting the motor and timing period. After completion of timing, switch 3 and 4 open, 1 and 2 close, motor stops, and timer resets to setpoint. Timer is now ready for another timing operation.

    *The 191 series is now obsolete with no direct replacement.  If you would like assistance in finding a timer for your application, please request a quote below.*

  • Eagle Signal SX210 Series Digital Timer

    The SX210 timer is a microprocessor based digital timer housed in a standard DIN style case (68mm square cutout). The small case and front bezel require minimal panel space yet provide large, easy to use programming keys and a .3 inch high LED display.

    $436.20
  • Eagle Signal TF Hand Set Timer

    The TF series timer is a low cost, manually set, synchronous motor driven timer, adjustable to a selected timer interval by a pointer knob. The TF is available in 6 time ranges from 1 minute to 11 hours.
    $119.20
  • Eagle Signal TM Time Module Repeat Cycle Timer

    *The TM series timer is discontinued.  Please contact us for assistance in finding an alternative timer.*


    The TM series TIME/MODULE® consists of a series of modules, each interlocking with the other and keyed so that they can be assembled only one way. Choosing the correct combination of modules will solve virtually all repeating time control problems.

  • Lovato TMM1 Series Multifunction Timer

     

    Lovato USA logo

    Looking for a different Industrial Timer?

    Click here for all other Industrial Timers.

    LOVATO Electric extends the range of electronic time relays with new modular models of the TM series line. Featuring a built-in counter and hour counter, these multifunctional time relays are perfect for monitoring machine runtime. With NFC technology, setting function thresholds and monitoring operations has never been easier.

    • Electronic time relay, multifunction, multiscale, multivoltage
    • Auxiliary supply voltage: 12…240VAC/DC
    • Time range from 0.1 second to 10 days
    • 1 relay output SPDT
    • Suitable for fixing on 35mm DIN rail or direct screw mounting.
    $36.00
  • Lovato TMM1-NFC Series Multifunction Timer NFC

     

    Lovato USA logo

    Looking for a different Industrial Timer?

    Click here for all other Industrial Timers.

    LOVATO Multifunction Protection Relay, with voltage and frequency monitoring for three-phase systems with or without neutral 1 output contact. NFC technology and App.

    • Multifunction, multiscale and multivoltage time relaywith NFC technology and App
    • Hour counter
    • Counter
    • Auxiliary power supply: 12…240VAC/DC
    • Time of scale range: from 0.1 seconds to 999 days
    • 1 relay output with changeover contact, 8A 250VAC
    • DIN43880 modular housing (1 module), suitable for mounting
      on 35mm DIN rail
    • Certifications: cULus, EAC
    • QR code on front for direct access to the website
    $44.00