Industrial Counters

Showing 1–12 of 27 results

Keeping an accurate count of products produced or and rolling out of the manufacturing process is important. Your processes can’t rely on faulty industrial counters that may fail again and again. Bad counts will lead to shortages of vital components or overages of products that don’t move as fast. Big Bear Instruments offers a full list of industrial counters built by trusted manufacturers like Eagle Signal, Veeder-Root, and more. These counters range in type such as totalizing counters, electronic counters, mechanical counters, and electro-mechanical counters. Sort by manufacturer, series, or type to find the best counter for your needed application. If there’s not an industrial counter on this page, then contact our customer support team so they can help find a solution.

  • Eagle Signal CX100 Repeat Cycle Timer

    The CX Series is a microprocessor based timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case. Time or count operation, time range, and standard or reverse start operation is selected by 7 miniature rocker switches located inside the unit housing.
    $562.95
  • Eagle Signal CX202 Microprocessor Timer/Counter

    The CX200 Series is a microprocessor based timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case. Time or count operation, time range, and standard or reverse start operation is selected by 7 miniature rocker switches located inside the unit housing.

    $414.74
  • Eagle Signal CX202A6 Timer/Counter

    Looking for a different CX202 part?

    CLICK HERE for all other CX202 configurations.

     

    The CX200 Series is a microprocessor based timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case. Time or count operation, time range, and standard or reverse start operation is selected by 7 miniature rocker switches located inside the unit housing.

    $414.74
  • Eagle Signal CX300 Microprocessor Timer/Counter

    The CX300 is a microprocessor based timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case which allows easy removal for programming changes and replacement. Time or count operation, time range, and the type of start input switch operation are programmed with 7 miniature rocker switches located inside the unit
    housing.

    $535.70
  • Veeder-Root 1205 Series Electro-Mechanical Totalizer

    Veeder-Root’s 1205 Series is the most popular counter in the world, and sets the standard for rugged totalizing counters. It comes available in base mount/knob reset, panel mount/rotary reset, and panel mount/lock & key reset models.  Wide temperature variations don’t upset its thermo-stable wheels and pinions. Severe voltage transients will not damage its direct AC coil, so external surge protection is not required. Duty cycles that result in continuous coil energization won’t degrade its life or performance

    $546.85
  • Veeder-Root 1259, 1261, & 1262 Series General Purpose Counter

    Strength, versatility and wide model range have made Veeder-Root 1259, 1261, and 1262 series counters a very popular choice for general use in many industries. Other features and configurations are available on special order, such as shaft variations, special wheel colors and markings and reset options.

    $615.30
  • Veeder-Root 1490 Series Vary Tally® Totalizer

    The Series 1490 Vary Tally is ruggedly constructed using die cast zinc and steel components, and will take extremely heavy use over a long service life. Standard models are offered that integrate up to 6 units, providing a common reset. Combinations of up to 114 units are possible for special orders. Among its many industrial and commercial uses are inspection tallies, medical and scientific studies, inventory control, traffic surveys, and point-of-sale records.

    $176.85
  • Veeder-Root 1667 & 1669 Series Visicounter

    For the most demanding applications indoors or outside, Veeder-Root 1667 and 1669 Series Visicounters withstand dust, moisture, oil, grease, shock, and vibration. They combine excellent performance with practically indestructible construction. They are commonly used on construction equipment, cement mixers, paving equipment, stokers, agricultural machinery, and other applications in extremely hostile environments. Available in both ratchet and geared drives, the 1667, 1669 Series features highly visible white-on-black figures, quick rotary-reset, rugged die cast case, and steel shaft.

    $292.68
  • Veeder-Root 1953 Gear Driven Visicounter

    Available in several geared ratios, the 1953 Series is especially well suited for linear measurement of feet, yards, 1/8 yards, or meters. Its doubleended shaft allows use of two measuring wheels – providing extra grip and stability of contact with measured material. It is commonly used in the textile, wire and cable, paper, rope, and sheet products industries.

    $484.93
  • Veeder-Root 7268 Series High Speed Non-Reset Counter

    Veeder-Root’s 7268 Series is frequently used for position indication on machine tools, back gauges, and laboratory equipment. It’s tough enough to be unaffected by punishing industrial environments, yet remains accurate and maintenance-free over a long service life.

    $258.10
  • Veeder-Root 7272 & 7287 Series Small Reset Counters

    The long-time standard in small, flange mount, mechanical totalizers. All external and internal parts are corrosion resistant. Its ruggedness and reliability contribute to trouble free and accurate performance – indoors and out. 7272 Series is available with left or right hand ratchet drives, while 7287 Series is equipped with revolution drive (adds one count per shaft revolution in either direction).

    $85.39
  • Veeder-Root 7428 & 7430 Series Totalizer

    The Veeder-Root 7428 and 7430 series medium sized totalizers have a bold 5-figure display and smooth rotary reset. Other features include long-life bearings and 0.25” (6.35 mm) shaft, permitting use of its measuring wheels for linear footage totalizing applications. Counting is bidirectional on rotary input models.

    $416.36